Measure the distance between the
release bearing and the clutch brake:
• If the distance is correct,
0.500" -.0560" (12.70 - 14.22 mm),
then Verify Clutch Brake Squeeze,
go to Step 4.
• If the distance is not between
500" -.560" (12.70 - 14.22 mm),
then Change Bearing Position,
go to Step 2.
1
0.500" -0.560"
(12.70 - 14.22 mm)
Release
Bearing
Hold
Clutch
Brake
Have an assistant
hold down clutch
pedal so internal
adjustment can
be made.
2
3
Adjust bearing position:
Note: Before measuring the distance between the release bearing and
clutch brake depress clutch pedal to remove free pedal in the cab.
T
O
T
U
R
N
D
E
P
R
E
S
S
B
O
L
T
Adjusting Nut
Part Number 125489
While pedal is held down, remove lockstrap and
move adjusting lug:
• If measurement was more than 0.560" (14.22
mm), move adjusting lug to the left (shown).
• If measurement was less than 0.500" (12.77 mm),
move adjusting lug to the right.
Lockstrap
Adjusting
Lug
Easy-Pedal & Easy Pedal Advantage Only: Value Clutch Only:
While pedal is held down, push adjusting nut and turn:
• If measurement was more than 0.560" (14.22 mm),
turn adjusting nut clockwise.
• If measurement was less than 0.500" (12.77 mm),
turn adjusting nut counterclockwise.
To Next Page
Loading...
