0.00"
Hydraulic Linkages:
Skip to Step 2.
Mechanical Linkages Only:
Adjust the clutch linkage until the
yoke fingers contact the release
bearing (zero free-play in cab).
Press the pedal to the
floor up to 5 times, this:
• Moves release bearing
slightly closer to the
transmission
• Gains free-play in cab
With the pedal up, measure the
distance between the release bearing
and the clutch brake. The correct
distance should be 0.490"-0.560"
(12.70-14.22 mm):
• If the distance is more the 0.560"
(14.22 mm), return to Step 1 and
readjust the clutch linkage.
• If the distance is less the 0.490"
(12.70 mm), see Solo Advantage
Heavy-Duty 15.5" Clutch
Troubleshooting. Go to
0.490"-0.560"
(12.70-14.22 mm)
Release
Bearing
Clutch
Brake
Yoke
Finger
5X
1
2
3
To Next Page
Loading...
