25
Easy Pedal Advantage
Manual Adjust Clutches
Lubricate
Zerk
Note: All clutches use a Lithium
complex grease with a
minimum of 325°F (163°C)
operating range meeting NLGI
grade 2 or 3 specs.
Note: Apply ample grease that
is visibly exiting the opening
and contacts the transmission
shaft. This will lube the clutch
brake and bushing when the
pedal is pressed.
For additio
nal lubrication
information, see TCMT0021.
Yoke
Finger
Failure to properly lubricate the
bearing/bushing will result in
bearing and sleeve failures.
Input Shaft
Apply grease to input
shaft and yoke fingers.
8
Apply grease to the cross
shaft bushings and linkage
pivot points.
2
9
CAUTION
IMPORTANT
Do not add lube (never seize or
grease) to the input shaft splines.
The disc must be free to move.
To Next Page
Loading...
