Eaton ePDU G3 - Administrator Access Levels

Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5 91
7. To enter new threshold values, type new values in any of the text boxes that follow, then click Save:
l
Low warning current threshold
l
High warning current threshold
l
High critical current threshold
l
Low critical voltage threshold
l
Low warning voltage threshold
l
High warning voltage threshold
l
High critical voltage threshold
8. To reset the threshold values to the default values, click Default, then click Save.
9. To reset a kilowatt hour (kWh) counter to zero, click Reset kWh, then click Save.
Outlets
Review/Modify ePDU Outlets
1. Access the Web interface and log in.
2. Under Power Management, select Outlets. The Outlets page displays.
3. Review basic monitoring information for individual outlets.
4. Click the outlet name to display a dialog for renaming the outlet.
5. To apply an operative action for a selected outlet, select the corresponding checkbox and then select one
of the following values from the Turn On/Off drop-down list in the top bar, then click Save.
l
On: Turn on the outlet.
l
Off: Turn off the outlet.
l
Reboot: Reboot the outlet.
6. To modify ePDU threshold values for a specified outlet, click the link on the group friendly name. The
Outlet Settings dialog displays.
NOTE The display varies depending on the profile assigned to the user.
l
Switch settings will not display for Metered Outlet (MO) or Metered Input (MI)
ePDUs.
l
Threshold settings will not display for Switched (SW) ePDUs.
l
Only the name of the outlets can be changed for Metered Input (MI) ePDUs.
NOTE This option is only for Switched (SW) and Managed (MA) ePDUs. The On/Off/reboot/
last-known state is associated with the “Control” feature for Managed (MA) or
Switched (SW) ePDUs.