Eaton ePDU G3 - Defining the Alarm or Event Condition

Maintenance and Alarms
Eaton ePDU G3 Operation Manual P-164000277—Rev 5 127
Defining the Alarm or Event Condition
You can derive defining information about the alarm or event from the associated number code. Figure 94
shows the location of the associated number code in the Code column on the Logs page of the Web interface.
Figure 94. Location of Alarm Code on Web Interface
This number code is a six-digit number. The first digit in the number conveys the source of the alarm or event.
The remaining five digits in the number code further identify and define the type of alarm (see Figure 95).
Figure 95. Alarm Code Format
X
X
X
X
X X
1-Digit Type Code:
0 or 1 = OS or System
2=Eaton ePDU
3=User
5-Digit Index Code and/or Identication Code:
For Type 0 and Type 1 = Identication Code (0 to 9999)
For Type 2 and Type 3 = Identication Code (0 to 999) and Index Code (0 to 99)