Eaton ePDU G3 - 8 Web Interface Operation; Navigating the Web Interface

Eaton ePDU G3 Operation Manual P-164000277—Rev 5 79
Chapter 8 Web Interface Operation
This chapter describes remotely configuring, managing, and monitoring an Eaton Enclosure Power Distribution
Unit (ePDU) G3 remotely through the ePDU Network Management and Control (eNMC) module Web interface.
This chapter describes the following:
l
Navigating the Web interface
l
Accessing the Web interface
l
Configuring settings and monitoring the ePDU
Navigating the Web Interface
The graphical Web interface is used to remotely monitor or configure the ePDU (see Figure 79). The Web
interface that corresponds to the ePDU topology type displays. This section describes the functions provided
by this interface.
Figure 79. Navigating the Web Interface (Opening Page)
NOTE When the Web browser is set to 100% (full page), we recommend setting your
screen resolution to a minimum of 1024 x 768 for the best display performance.
5
21
3
6
7
8
4
9
10