Eaton ePDU G3 - USB Firmware Upgrade and Active Alarms

Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5 109
6. Choose one of the following security levels to be applied to the SNMPv3 user:
l
Not Set: the SNMPv3 user is not configured and therefore disabled.
l
Auth Priv: an authentication password and a privacy key are required to access the MIB objects.
l
Auth No Priv: an authentication password but no privacy key are required to access the MIB objects.
l
No Auth No Priv: no authentication password or privacy key are required to access the MIB objects.
7. Type the authentication password (if required by security level), with 8 to 24 characters allowed.
8. Type the privacy key (if required by security level), with 8 to 24 characters allowed.
9. Click Save. Otherwise, click Cancel to return to the SNMP Settings page.
Access Eaton ePDU MIB Objects (Privileged Access Only)
1. Access the Web interface and log in.
2. Under Network, select SNMP. The SNMP Settings page displays.
3. Click Link to the ePDU MIB.
Energy Wise
Enable Energy Wise
1. Access the Web interface and log in.
2. Under Network, select Energy Wise. The Energy Wise page displays.
3. In the Configuration panel, ensure that the Enable check box is checked and that the associated SDK
Version number displays. (The SDK version is not editable.)
4. Type the Domain name (maximum 63 characters).
5. For Security, select Enabled or Disabled.
6. For Secret, type the secret key (maximum 63 characters).
7. For Threshold Level, type a threshold number (minimum value 0, maximum value 10).
8. For the Remote Port and Listen Port value, type a port number (minimum value 1, maximum value 65535).
9. Click Save.
Disable Energy Wise
1. Access the Web interface and log in.
2. Under Network, select Energy Wise. The Energy Wise page displays.
3. In the Configuration panel, ensure that the Disabled check box is checked. (When Disable is selected, all
other fields in the Configuration panel are also disabled.)
4. Click Save.
Start/Stop Energy Wise Commands
1. Access the Web interface and log in.
2. Under Network, select Energy Wise. The Energy Wise page displays.