Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5 104
4. To select and store an eNMC module configuration file to be used during an upgrade, use Browse to
review and select the configuration file.
5. Click either Upload or Download Configuration and a message is provided to tell you if the file uploaded
successfully or failed to upload:
l
Upload: Gets the list of the ePDU XML parameters from a file selected by the browser and sends it to
the ePDU.
l
Download Configuration: Stores a list of the ePDU XML parameters in a file selected by the browser..
Date &Time
Manually Configure the Date and Time
1. Access the Web interface and log in.
2. Under Settings, select Date & Time. The Date & Time page displays.
3. In the Global Settings panel, choose the date format from the drop-down list.
4. Click Save.
5. Click the Set manually radio button.
6. Type the date according to the format defined by Date Format, or select the date using the date picker.
7. Type the time or select a time from the drop-down list. The time format is hh:mm:ss, where hh = hours,
mm = minutes, ss = second.
8. Click Save.
Automatically Configure the Date and Time
1. Access the Web interface and log in.
2. Under Settings, select Date & Time. The Date & Time page displays.
3. In the Global Settings panel, choose the date format.
4. Click Save.
5. In the Global Settings panel, click the Synchronize with NTP Server radio button
6. Type the Time Server IPv4 / IPv6 address or host name.
NOTE When uploading a file, you cannot write the file path in the text field. You must
select the file from the file explorer window that displays when you click Browse.
NOTE The file to upload must be a file compatible with the hardware of the ePDU. If not,
the upload does not process due to an incompatibility error.
NOTE You do not need to restart the card after a successful upload.
NOTE Changing the date to a future date and then reverting the date to the current date
may affect the order of the display in the logs.
To Next Page
Loading...
