Eaton ePDU G3 - Command

Serial Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5 69
? command
Use this command to list all available ePDU CLI commands or receive detailed help on specified commands
Usage
pdu#0>?
pdu#0><command> ?
where:
<command> = info, get, set, pdu, quit
List all available ePDU CLI commands
pdu#0>?
Example
pdu#0>?
Usage: ? info get set pdu quit
pdu#0>
List detailed help on a specific ePDU CLI command
pdu#0><command> ?
Example 1
pdu#0>set ?
Usage: change the device data defined by its’ name followed by the new value set
[name] [value]
pdu#0>
Example 2
pdu#0>pdu ?
Usage: select the strapping pdu unit to focus on pdu [number]
PDU#0