Eaton ePDU G3 - Ipv4 Submenu; Language Submenu; Factory Submenu

LCD Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5 66
IPv4 Submenu
The IPv4 submenu allows you to set options for:
l
DHCP
l
IP address
l
Subnet Mask
l
Gateway
Figure 75 shows the IP Address displays.
On the Settings menu, scroll up or down to highlight IPv4. Press ENTER to display the options screen. Scroll
up or down to highlight the selected option from the menu. Press ENTER to display the screens to set the
values for the selected option. After you select the values, press ENTER to set the values as displayed on the
screen. Press ESC to return to the previous menu.
Figure 75. Example IPv4 Submenu Displays
Language Submenu
On the Settings menu, scroll up or down to highlight Language. Press ENTER. Scroll up or down to highlight
the selected language option from the menu. Press ENTER to set the selected language. Press ESC to return
to the previous menu (see Figure 76).
Figure 76. Example Language Setting
Factory Submenu
The Factory submenu allows you to reset the ePDU to the factory settings (see Figure 77).
On the Settings menu, scroll down to highlight Factory. Press ENTER to display the screens to set and confirm
the return to factory settings. After you make the selections, press ENTER to set the values as displayed on
the screen. Press ESC to return to the previous menu.
ACTIVE ALARMS
EVENT LOG
OUTLET READINGS
SETTINGS
ePDU INFO
DHCP
IP address
Subnet Mask
Gateway
IP address
IPv4 Settings
IP address
192 168
2
1
OK
IP address
168
1
OK
192
2
Enter Enter Enter
Enter
ESC
ESC
ESC
Display
Daisy Chain
Factory
Settings
Language
IPv4
ESC
Daisy Chain
IPv4
Factory
English
French
German
Spanish
Russian
Language Setting
English
ESC
Enter
Display
Daisy Chain
IPv4
Factory
Settings
Language