Eaton ePDU G3 - Info Command

Serial Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5 70
info command
Use this command to display the device data defined by its name information (info [name]).
pdu#0>info ?
info [System]
info [Network]
info [User]
info [Access]
info [Time]
info [eMail]
info [SNMP]
info [NetworkManagement]
info [EnergyWise]
info [DaisyChain]
info [UserDefinedGroup]
info [PowerSchedule]
info [Summary]
info [Input1]
info [Input2]
NOTE 1
info [Gang]
info [Outlet]
info [Environment]
pdu#0>
NOTE 1: On Dual Input ePDU only.
Usage
pdu#0>info <object>
where:
<object> = name of a simple object, an object of type array or a family of objects.
Example 1
pdu#0>info System.Network.DHCP
Example 2
pdu#0>info PDU.*
Name
Unit RO/RW Type
System.Network.DHCP RW 0: Disabled
1: Enabled
Name
Unit RO/RW Type
PDU.DaisyChain[x].ChangedStatus.Communication
Lost
sec RO Integer:0..4294967295(136 years)