Serial Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 75
PDU.Gang[x].Pole[1].ReactivePower HideMeasure Reactive Power provided by the pole. dVA
R
RO
PDU.Gang[x].Pole[1].Statistic[4].Energy HideMeasure Energy counter since last reset. As it is reset to 0, the
related timestamp is updated with the current RTC value.
Wh RO
PDU.Gang[x].Pole[1].Statistic[5].Energy HideMeasure Energy counter since last reset. When it is reset to 0 then
at the same time the related timestamp is updated with
the current RTC value.
Wh RO
PDU.Gang[x].Pole[1].Voltage HideMeasure Voltage Measured on the pole. cV RO
PDU.Gang[x].Pole[2].ActivePower HideMeasure Active Power provided by the pole. dW RO
PDU.Gang[x].Pole[2].ApparentPower HideMeasure Apparent Power provided by the pole. dVA RO
PDU.Gang[x].Pole[2].Current HideMeasure Current Power provided by the pole. mA RO
PDU.Gang[x].Pole[2].PeakFactor HideMeasure Crest factor of the current provided by the pole. m% RO
PDU.Gang[x].Pole[2].PhaseID Constant Phase number that is connected to the pole: 1, 2, or 3. - RO
PDU.Gang[x].Pole[2].PowerFactor HideMeasure Ratio of active power / apparent power provided by the
pole of the breaker or outlet section.
m% RO
PDU.Gang[x].Pole[2].ReactivePower HideMeasure Reactive Power provided by the pole. dVA
R
RO
PDU.Gang[x].Pole[2].Statistic[4].Energy HideMeasure Energy counter since last reset. As it is reset to 0, the
related timestamp is updated with the current RTC value.
Wh RO
PDU.Gang[x].Pole[2].Voltage HideMeasure Voltage Measured on the pole. cV RO
PDU.Gang[x].PowerFactor Measure Ratio of active power / apparent power provided by the
breaker or outlet section.
m% RO
PDU.Gang[x].PresentStatus.OverCurrent AlarmL1 0: No threshold triggered
1: Warning low threshold triggered
2: Critical low threshold triggered
3: Warning high threshold triggered
4: Critical high threshold triggered
- RO
PDU.Gang[x].PresentStatus.OverVoltage AlarmL1 0: No threshold triggered
1: Warning low threshold triggered
2: Critical low threshold triggered
3: Warning high threshold triggered
4: Critical high threshold triggered
- RO
PDU.Gang[x].PresentStatus.SwitchOnOff AlarmL1 - RO
PDU.Gang[x].PresentStatus.Tripped AlarmL1 0 : Breaker closed
1 : Breaker tripped (or open)
- RO
PDU.Gang[x].ReactivePower Measure Reactive Power provided by the breaker/section. For a
double pole breaker, the reactive power for the two poles
is combined.
dVA
R
RO
PDU.Gang[x].Statistic[3].Current Measure Current peak consumption since last reset.
As it is reset to 0, the related timestamp is updated with
the current RTC value.
When a value higher than the stored value is detected, the
stored valued is overwritten.
mA RO
Table 8. ePDU CLI Objects (Continued)
XML Object Name Type Description Unit Access
To Next Page
Loading...
