4 Creating a planned SmartWire-DTSmartWire-DT configuration in SWD-Assist
4.9 Exporting the SmartWire-DT modules' I/O data
42 SmartWire-DT Gateway EU5C-SWD-EIP-MODTCP 08/17 MN120003Z EN www.eaton.com
EtherNet/IP
When using the EtherNet/IP operating mode, this data can be exported as a
CSV file for the RSLogix 5000 PLC programming environment and can then
be imported into RSLogix 5000 PLC programming environment V17.0 or
higher.
Modbus-TCP
In the case of Modbus-TCP applications, the data can be exported in a text
file format.
Chapter ￫ Chapter 5 "Commissioning the PLC programming environment“
describes how the CSV file for the EtherNet/IP communications protocol is
used.
To Next Page
Loading...
