Need help?Do you have a question about the Eaton PDI WaveStar BCMS and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Communication Protocol | Modbus TCP/IP, SNMP |
| Operating Temperature | 60°C |
| Humidity | 5 to 95% RH, non-condensing |
| Dimensions | Varies depending on the model |
| Weight | Varies depending on the model |
| Certifications | UL, CE |
| Type | Branch Circuit Monitoring System (BCMS) |
Describes the BCMS Hub enclosure and its capability to house a single or dual BCMS Hub system.
Details the downstream Modbus RTU and upstream Modbus RTU or TCP/IP communication links.
Lists the equipment and BCMS devices that can be monitored by a BCMS Hub.
Explains electrical loads, Modbus addresses, segments, counting, examples, and determination.
Provides contact information for support and details on product warranty.
Details the enclosure dimensions and mounting requirements for the BCMS Hub.
Describes power and communication connections for a single BCMS Hub unit.
Explains power and communication connections for a BCMS Dual Hub system.
Details connections for RPPs, JCOMMs, and Busway Systems to the BCMS Hub.
Covers logging in, access levels, initial admin setup, and user management via the Users screen.
Configures Ethernet IP settings and Modbus RTU parameters for upstream communication.
Enables manual time setting or synchronization using SNTP for accurate logging.
Configures email or modem notification for alarms and warnings detected by the BCMS Hub.
Overview of the Home screen interface and the initial device scanning process.
Explains how to navigate and view detailed information for individual devices.
Details viewing information for Bus System devices and various panelboard types.
Describes how to view, clear, and download the BCMS Hub's event log for analysis.
Explains how to access and use web pages for monitoring BCMS Hub device status.
To Next Page