Using the Control Panel
9-25
EATON Powerware
®
9390 UPS (100–160 kVA) Installation and Operation Manual S 164201554 Rev E powerware.com
Select MAXIMUM % of FULL LOAD from the Maximum Current Log Setup screen
(screen 2) menu to display the Maximum % of Full Load Setup screen. The Maximum % of
Full Load Setup screen allows the full load limit of the event being monitored to be
changed. Figure 9 -28 shows the Maximum % of Full Load Setup screen.
Use the
or pushbuttons to select the character position. Use the or pushbuttons
to change the character value. Once the new value is entered, press the
DONE
pushbutton. The Maximum % of Full Load Setup Save screen is displayed.
000
DONE
MAXIMUM % OF FULL LOAD SETUP
Figure 9-28. Maximum % of Full Load Setup Screen
To Next Page
Loading...
