Using the Control Panel
9-42
EATON Powerware
®
9390 UPS (100–160 kVA) Installation and Operation Manual S 164201554 Rev E powerware.com
The Set Date and Time DD/MM/YYYY screen allows the internal date and time of the UPS
to be set in the day/month/year format. The date and time information is used for display
on the screen and for logging events in the Event and History Logs. Figure 9 -48 shows the
Set Date and Time DD/MM/YYYY screen.
Use the
or pushbuttons to highlight the setting to be changed. Use the or
pushbuttons to make the change. When finished making changes, use the or
pushbuttons to highlight SAVE and the or pushbuttons to select YES. To complete the
save function and return to the System Setup screen, select the
pushbutton.
DATE MONTH YEAR HOUR MINUTE SAVE
27 02 2004 15 42 YES
SET DATE AND TIME DD/MM/YYYY
Figure 9-48. Set Date and Time DD/MM/YYYY Screen
To Next Page
Loading...
