Using the Control Panel
9-17
EATON Powerware
®
9390 UPS (100–160 kVA) Installation and Operation Manual S 164201554 Rev E powerware.com
Select MAXIMUM LEVEL (KW) from the Current KW Demand Log Setup screen 2 menu to
display the Maximum Level (KW) Setup screen. The Maximum Level (KW) Setup screen
allows the KW limit of the event being monitored to be changed. Figure 9-19 shows the
Maximum Level (KW) Setup screen.
Use the
or pushbuttons to select the character position. Use the or pushbuttons
to change the character value. Once the new value is entered, press the
DONE
pushbutton. The Maximum Level (KW) Setup Save screen is displayed.
0000
DONE
MAXIMUM LEVEL (KW) SETUP
Figure 9-19. Maximum Level (KW) Setup Screen
To Next Page
Loading...
