Eaton Powerware 9390 - Figure 9-26. Time Interval Monitored Setup Screen

Using the Control Panel
9-23
EATON Powerware
®
9390 UPS (100–160 kVA) Installation and Operation Manual S 164201554 Rev E powerware.com
Select TIME INTERVAL MONITORED from the Maximum Current Log Setup screen 2
menu to display the Time Interval Monitored Setup screen. The Time Interval Monitored
Setup screen allows the time duration of the event being monitored to be changed.
Figure 9-26 shows the Time Interval Monitored Setup screen.
Use the
or pushbuttons to select the character position. Use the or pushbuttons
to change the character value. Once the new value is entered, press the
DONE
pushbutton. The Time Interval Monitored Setup Save screen is displayed.
0000
DONE
TIME INTERVAL MONITORED SETUP
Figure 9-26. Time Interval Monitored Setup Screen