Using Features and Options
11-2
EATON Powerware
®
9390 UPS (100–160 kVA) Installation and Operation Manual S 164201554 Rev E powerware.com
11.3 Optional Remote Monitor Panel II
As an option, a Remote Monitor Panel II (RMP II) can be installed to monitor the operation
of the UPS system from virtually any location within the facility, up to 152.4m (500 ft) from
the UPS. The RMP II contains backlit status indicators and a local horn. The RMP II can be
flush-mounted or surface-mounted on a desktop, or secured to a wall. Figure 11-1 shows
an RMP II.
Figure 11-1. Remote Monitor Panel II
To Next Page
Loading...
