Eaton Powerware 9390 - Figure 9-38. System Setup Level 0 Screen

Using the Control Panel
9-33
EATON Powerware
®
9390 UPS (100–160 kVA) Installation and Operation Manual S 164201554 Rev E powerware.com
9.2.8 System Setup Level 0 Screens
Press the SETUP pushbutton on the main menu bar to display the System Setup Level 0
Screen. This screen can be used to:
쑺 Enter a password to access Level 1 functions (see paragraph 9.2.9)
No password is necessary to access Level 0 functions.
쑺 Set the screen contrast
쑺 Showthefirmwareversionsinstalled
쑺 Identify the unit type
Figure 9-38 shows the System Setup Level 0 menu screen.
Use the
or pushbuttons to highlight the setup function screen desired, then press the
SELECT pushbutton to display the function screen.
ENTER PAS SWORD
CONTRAST ADJUST
VERSIONS
UNIT TYPE
SYSTEM SETUP LEVEL 0
SELECT
Figure 9-38. System Setup Level 0 Screen