SC200 Handbook
Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H November 2011
SC200 system controller
I/O board
Voltage feed module
USB communications
Ethernet communications
RS232 communications
Digital relay outputs (6) to external devices and/or
alarm indication system
Digital inputs (6) from external voltage-free switches
or relay contacts
Connection to additional I/O board(s) and/or
SiteSure-3G I/O module(s)
Connection to dc common bus
Connection to dc live bus
Communications to rectifiers
DC power system digital inputs (Load Fuse Fail,
Battery Fuse Fail, AC Distribution Fan Fail, AC
Distribution MOV Fail)
Connections for battery mid-points (4)
Connection for temperature sensors (2)
Connection for current sensors (3)
Connection for LVD contactor and auxiliary switch
Connection for LVD contactor and auxiliary switch
Bus voltage sense and LVD power connections
I/O and system controller power and RXP comms
connections
For connector pin-outs see details on page 114. For input and output specifications see details on
page 105.
Compatible Software
The following software is compatible with the SC200 system controller:
DCTools Configuration Software. Latest version is available free from
dcpower.eaton.com/downloads.
PowerManagerII Remote Control and Monitoring Software. Contact your Eaton dc product
supplier for further information (see Worldwide Support on page 125).
Recommended web browsers: Microsoft Internet Explorer 8 or later (IE6 is compatible but
with reduced performance), Mozilla Firefox 3.0 or later.
To Next Page
Loading...
