Eaton SC200 - SC200 Identity Information; SC200 Internal Clock

SC200 Handbook
14
Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H November 2011
SC200 Identity Information
The following identity information is stored in the SC200.
Parameter
Description
Where to find:
Serial Number
The SC200 serial number (factory set).
SC200: Info
DCTools/Web:
Configuration > Identity >
Software
Software Version
(App Version)
The version of the embedded
software in the SC200 (factory set).
If required, the following site specific information can be stored in the SC200 to assist site
management.
Parameter
Description
Where to find:
System
Manufacturer
The manufacturer of the dc power
system.
DCTools/Web:
Configuration > Identity
System Type
The dc power system model number.
System Serial
Number
The dc power system serial number.
System Location
Location of dc power system at the
site.
Site Name
Name of the site.
Site Address
Address of the site.
Site Notes
Any notes relevant to site access,
location or other matters.
Contact
Contact name, phone number, and so
on.
Configuration
Name
Reference name of the configuration
file in the SC200.
SC200 Internal Clock
The SC200 has a battery-backed clock for time stamping of log entries and Control Processes.
The time and date is factory set. It can also be set manually using a web browser or can be
synchronized (either to a PC clock using DCTools or to an SNTP reference time server).