SC200 Operation
Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H November 2011
► To view the SC200 time
Either:
Use the keypad to go to: Info.
This time is set to Universal Coordinated Time (UTC). DCTools, Web and PowerManagerII
convert local PC time to/from UTC for the SC200. For practical purposes UTC is equivalent
to Greenwich Mean Time (GMT).
Or:
In DCTools go to: Configuration > Identity.
This time is set to the SC200 time adjusted to the time zone set in the PC.
Or:
In Web go to: Configuration > Time.
This time is set to the SC200 time adjusted to the time zone set in the PC.
► To set the time
1 Connect to the SC200 via a web browser. (See Ethernet Communications on page 82.)
2 Go to Configuration > Time.
3 Click on the time-date field to select the text.
4 Select the time or date text to be changed and type the correct time/date.
5 Press Enter on the keyboard. Then select Apply in the Changes window.
Time Synchronization
If required, the SC200 time can be synchronized either to the internal time of a PC or laptop, or
to a reference time server using SNTP protocol (SC200 must have access to the server).
► To synchronize the SC200 time using DCTools or PowerManagerII
1 Ensure the time on the PC is correct before synchronizing.
PowerManagerII can be set to automatically synchronize SC200 clocks.
2 Connect to the SC200 with DCTools/PowerManagerII. (See Communications Options on page
82.)
3 Go to Configuration >Identity > Time Synchronization
4 Click Synchronize to synchronize the SC200 time to the PC/laptop time.
DCTools, Web and PowerManagerII convert local PC time to/from UTC for the SC200.
► To synchronize the SC200 time using SNTP
For more information on SNTP, including a list of public SNTP servers, visit www.ntp.org
http://www.ntp.org.
Ensure that your network has an internal SNTP server or allows access to an external server. It
may be necessary to configure access through your network's firewall.
1 Connect to the SC200 via DCTools/Web.
2 Either:
In DCTools go to Configuration > Configuration > SNTP, or
In Web go to Configuration > Time > SNTP.
To Next Page
Loading...
