Eaton SC200 - Starting the SC200; SC200 Operation using the Keypad and Screen

SC200 Handbook
6
Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H November 2011
Starting the SC200
When dc power is applied to the SC200 (via the RXP connector YS11) the start-up sequence
begins.

Approx.
120s


Start-up screen
Main screen
Menu screen
The values shown are
configurable, see details on page
11. All active Critical, Major,
Minor and Warning alarms are
displayed.
See navigation details on page 8.
If Logon is required see Keypad
Access Security on page 10.
Main Screen Shortcut Keys
Key
Function
From the Main Screen go directly to the Alarms screen.
From the Main Screen go directly to the Settings screen.
From the Main Screen go directly to the Control Processes screen.
From the Main Screen go directly to the Analogs screen.
SC200 Operation using the Keypad and Screen

LCD

Soft key 1 label

Soft key 1

Navigation keys (Up - Down -
Left - Right)

Soft key 2

Soft key 2 label