Eaton XV300 Series - Figure 19: Dimensional Drawing for Mount

3. Installation
3.3 Mounting
Not a true-to-scale template! If necessary, make your own template based on the dimensional drawing
for mounting and the right scale.
Figure 19: Dimensional drawing for mountingXV-313-10-..
1. Carefully insert the XV-313 into the mounting cutout from behind.
2. Center the XV-313 in the mounting cutout.
3. Use washers and M4 nuts to fasten the XV-313 to all the weld studs on the
sheet in such a way that there is zero clearance.
Figure 20: Mounting XV-313
40
XV30012/15 MN048017 ENwww.eaton.eu