Eaton XV300 Series - External Connections and Interfaces

5. External connections
5. External connections
With their ports, Eaton's XV300 Touch Panel make it possible to connect a variety of
peripheral devices and components.
DANGER
STRAYCURRENTS
Largeequalizingcurrentsbetweenthefunctionalearthingsystemandthe
groundsystemofdifferentdevicesmayresultinfireorinmalfunctionsdue
tosignalinterference.
If necessary, route an equipotential bonding conductor, with a cross-sectional
area that is several times larger than that of the cable shielding, parallel to the
cable.
CAUTION
INTERFERENCES
Thevaluesspecifiedinthetechnicaldata,aswellasthedevice'selec-
tromagneticcompatibility(EMC),cannotbeguaranteedifthefollowingare
used:unsuitablecables,improperlyassembledandterminatedcables,
and/orwiringthatdoesnotconformtotheapplicablestandards.
Onlyusecablesassembledandterminatedbyprofessionals.
Thecablesbeingusedmustbeassembledandterminatedasrequiredby
theport/interfacedescriptioninthisdocument.
WhenwiringtheXV300TouchPanel,followallinstructionsregardinghow
towirethecorrespondingport/interface.
AllgeneralDirectivesandstandardsmustbecompliedwith.
XV30012/15 MN048017 ENwww.eaton.eu
47