Eaton XV300 Series - 7 Maintenance; Cleaning and Maintenance; Capacitive Multi-Touch Technology (PCT); Battery

7. Maintenance
7.1 Cleaning and maintenance
7. Maintenance
7.1 Cleaning and maintenance
The XV300 units are maintenance-free.
However, the following work may need to be carried out:
l Cleaning the Capacitive multi-touch technology (PCT) when soiled.
l Recalibrating the Capacitive multi-touch technology (PCT) if it stops responding cor-
rectly to touch.
7.1.1 Capacitive multi-touch technology (PCT)
When soiled:
CAUTION
POINTY,SHARPOBJECTSANDCORROSIVELIQUIDS
WhencleaningtheXV300:
l Do not use any pointy or sharp objects (e.g., knives).
l Do not use aggressive or abrasive cleaning products or solvents.
MakesurethatnoliquidsgetintotheXV300unit(short-circuithazard)and
thattheXV300unitisnotdamagedinanyway.
Clean the Capacitive multi-touch technology (PCT) with a clean, soft, damp cloth.
7.1.2 Battery
The internal battery used to back up the real-time clock is maintenance-free and is
sized for a buffer time when de-energized, provided the corresponding ambient con-
ditions and temperature are adhered, to: approx. 10 years at 25° C (77°F).
7.2 Repairs
For repairs, please contact your distributor or Eaton's Technical Support.
CAUTION
DESTRUCTION
TheXV300shouldonlybeopenedbythemanufacturerorbyanauthorized
center.OperatetheXV300untilonlywiththeenclosurefullyclosedand
sealed.
Use the original packaging to ship the device.
66
XV30012/15 MN048017 ENwww.eaton.eu