Eaton XV300 Series - USB Interface Details

5. External connections
5.3 USB interfaces
5.3 USB interfaces
Eaton XV300 Touch Panels feature ports that can be used to connect USB peripheral
devices supported by the XV300's hardware and operating system.
CAUTION
Whenusingcommerciallyavailableperipheraldevices(e.g.,withtheUSB
port),itisimportanttokeepinmindthattheirEMCinterferenceimmunity
parametersmayrenderthemunsuitableforuseinindustrialenvironments.
TheUSBports(USBhostandUSBdevice)ontheXV300TouchPanelunit
aremeantformaintenanceworkonly.
Only use standard USB cables with a shield.
Max. cable length: 5m.
5.3.1 USB Host
Figure 26: USB 2.0, not galvanically isolated, plug type A, Full power (500 mA)
5.3.2 USB device
The USB device interface supports USB 2.0.
Figure 27: USB 2.0, not galvanically isolated, plug type B
50
XV30012/15 MN048017 ENwww.eaton.eu