Need help?Do you have a question about the ECKELMANN UA 412 S and is the answer not in the manual?
Explains safety instructions, general notes, and warning symbols.
Defines liability exclusion and necessary qualifications for personnel.
Specifies intended use and critical safety rules for operation.
Details precautions for handling electrostatic sensitive components.
Describes the controller's application scope and system integration.
Details the controller's physical housing and expansion capabilities.
Differentiates controller models and their feature sets.
Outlines the process for updating the controller's software.
Explains initial startup procedures and sensor type configuration.
Details the core functions and operations of the controller.
Covers safety interlocks and compressor control logic.
Explains defrost cycles and fan operation management.
Describes frame heater functions and manual device shutdown.
Covers setpoint switching and case lighting control.
Details emergency power modes and temperature display connectivity.
Explains how messages and alarms are logged.
Outlines physical installation steps and considerations.
Details the process for mounting the controller on a DIN rail.
Explains how to connect wires using spring terminals.
Configures initial settings and the CAN bus network address.
Sets the controller model and master/slave operational mode.
Covers power connection and interpretation of status indicator lights.
Details overall controller setup and assigning a descriptive name.
Provides instructions for replacing the internal backup battery.
Outlines the process for updating the controller's firmware.
Shows overall terminal layout and 230V AC power connections.
Details the function of each 230V AC relay output.
Explains digital inputs and 0-10V analogue output configurations.
Covers CAN bus connectivity and 24V DC transistor output functions.
Details display connections and 4-20mA analogue input configurations.
Explains how temperature sensors are connected and assigned.
Covers USB port usage and master-slave defrost synchronization wiring.
Lists methods for operating the controller.
Details on-site operation using a BT 300 interface.
Explains how to lock setpoint adjustments on the interface.
Describes remote operation using system centers or terminals.
Explains navigation within controller menus.
Guides on accessing controller menus remotely.
Details how to unlock input for parameter changes.
Explains service mode for maintenance operations.
Presents the menu structure for SPIR410 controller.
Presents the menu structure for SPIR290 controller.
Outlines safe procedures for removing the equipment.
Provides information on proper product and battery disposal.
Lists alarm types, their causes, and remedies.
Explains alarms for temperature deviations and lack of defrost.
Addresses sensor fault alarms and their suppression during defrost.
Details alarms for hardware issues and system restart behavior.
Allows setting custom priorities for alarms.
Describes how alarms are transmitted and how they are cleared.
Explains non-alarm notifications and transient event handling.
Details the internal log for storing messages and alarms.
Lists electrical characteristics and ratings of the controller.
Provides physical dimensions and sensor data.
Lists part numbers for different controller models.
Lists part numbers for compatible accessories.
Explains safety instructions, general notes, and warning symbols.
Defines liability exclusion and necessary qualifications for personnel.
Specifies intended use and critical safety rules for operation.
Details precautions for handling electrostatic sensitive components.
Describes the controller's application scope and system integration.
Details the controller's physical housing and expansion capabilities.
Differentiates controller models and their feature sets.
Outlines the process for updating the controller's software.
Explains initial startup procedures and sensor type configuration.
Details the core functions and operations of the controller.
Covers safety interlocks and compressor control logic.
Explains defrost cycles and fan operation management.
Describes frame heater functions and manual device shutdown.
Covers setpoint switching and case lighting control.
Details emergency power modes and temperature display connectivity.
Explains how messages and alarms are logged.
Outlines physical installation steps and considerations.
Details the process for mounting the controller on a DIN rail.
Explains how to connect wires using spring terminals.
Configures initial settings and the CAN bus network address.
Sets the controller model and master/slave operational mode.
Covers power connection and interpretation of status indicator lights.
Details overall controller setup and assigning a descriptive name.
Provides instructions for replacing the internal backup battery.
Outlines the process for updating the controller's firmware.
Shows overall terminal layout and 230V AC power connections.
Details the function of each 230V AC relay output.
Explains digital inputs and 0-10V analogue output configurations.
Covers CAN bus connectivity and 24V DC transistor output functions.
Details display connections and 4-20mA analogue input configurations.
Explains how temperature sensors are connected and assigned.
Covers USB port usage and master-slave defrost synchronization wiring.
Lists methods for operating the controller.
Details on-site operation using a BT 300 interface.
Explains how to lock setpoint adjustments on the interface.
Describes remote operation using system centers or terminals.
Explains navigation within controller menus.
Guides on accessing controller menus remotely.
Details how to unlock input for parameter changes.
Explains service mode for maintenance operations.
Presents the menu structure for SPIR410 controller.
Presents the menu structure for SPIR290 controller.
Outlines safe procedures for removing the equipment.
Provides information on proper product and battery disposal.
Lists alarm types, their causes, and remedies.
Explains alarms for temperature deviations and lack of defrost.
Addresses sensor fault alarms and their suppression during defrost.
Details alarms for hardware issues and system restart behavior.
Allows setting custom priorities for alarms.
Describes how alarms are transmitted and how they are cleared.
Explains non-alarm notifications and transient event handling.
Details the internal log for storing messages and alarms.
Lists electrical characteristics and ratings of the controller.
Provides physical dimensions and sensor data.
Lists part numbers for different controller models.
Lists part numbers for compatible accessories.
General| Brand | ECKELMANN |
|---|---|
| Model | UA 412 S |
| Category | Controller |
| Language | English |
To Next Page
