ECKELMANN Virtus 5 Series - 6.4 Modbus connection of case controllers



Firmware V7.16.x
16.05.2023
62/183
•
•
•
6.4 Modbus connection of case controllers
The "COM3/MODBUS" connection is used for the integration of RS485 controllers in the E*LDS-System.
The following controllers are supported:
UA30RC/UA30RScompactcasecontrollers;fordetails,seechapterEinbindung von Kühlstellenreglern
des E*LDS-Systems
LDS1 gateways with case controllers of the LDS1 system
Dixell controllers; for details, see chapter Integration of external controllers
For further details about pin assignments, see chapter Terminal assignment of the COM3 / Modbus terminals
(RS485)