1.6 Warranty
The manufacturer provides a warranty for operational safety, reliability and performance
under the following conditions only:
n Assembly
, connection, adjustment, maintenance and repairs must be carried out
by qualified and authorised specialist personnel in compliance with all documents
supplied.
n Please follow the instructions for use in the User Manual.
n Only original equipment spare parts are to be used for repairs.
n If metering media have been named for use in this manual, we explicitly exclude
warranty / liability if other products are used!
Our products are built, tested and certified in accordance with current
standards/guidelines. They left the factory in a safe, faultless condition.
T
o maintain this condition and to ensure a trouble-free operation, the user
must observe all instructions, warnings, maintenance regulations, etc. that are
contained in all the corresponding manuals and that may be attached to the
product.
The manufacturer's general warranty and service conditions apply.
1.7 Repairs/returns to Ecolab Engineering GmbH
DANGER!
Conditions for returns
Before being returned, all parts must be completely free of all chemicals!
W
e would point out that only clean, rinsed parts that are free of all
chemicals can be accepted by our service!
This is the only way of excluding the possibility of the risk of injury to our staff
due to residues of chemical products. The goods sent in must, where possible,
also be packed in a suitable bag preventing any leakage of liquid residues into
the surrounding packaging. Enclose a copy of the product data sheet for the
chemical used so that our Service staff can be prepared to use the necessary
personal protective equipment (PPE).
The return must be requested online
https://www.ecolab-engineering.de/de/kontakt/ruecksendungen/
Fill in all details and follow the further navigation.
Y
ou will receive the completed return form by email.
General
10MAN054128 Ver. 01-06.2024
To Next Page
Loading...
