1.4 Storage
In certain cases, storage instructions may be specified on the packages that go
beyond the requirements specified here.
These must be observed accordingly
.
n Do not store outdoors.
n Store in a dry and dust-free place.
n Do not use abrasive solutions.
n Keep away from direct sunlight.
n A
void mechanical vibrations.
n If stored for longer than 3 months, regularly check the condition of all parts and
packaging. If necessary, renew or replace the packaging.
n Store away from frost.
n For more information, please see
Ä
10 Technical data
NOTICE!
Intermediate storage
–
The packaging is designed for a storage period of 3 months.
– If the dispenser is not operational for a period of longer than one week: fully
empty and flush tank with water.
CAUTION!
Risk of damage to the dispenser
.
Ingress of dirt and water can damage the dispenser. Never clean the unit with
a steam cleaner or with a water jet.
1.5 Equipment marking – identification plate
Information on equipment marking and information on the rating plate can be
found in chapter
Ä
Chapter 10 ‘Technical data’ on page 50 .
The correct specification of the name and type is important for all queries.
This is the only way of ensuring fast and accurate processing of your enquiry.
General
9 MAN054128 Ver. 01-06.2024
To Next Page
Loading...
