Ecolab SMARTPOWER - Maintenance and Service Work; Clean the Appliance; Opening the Front Hatch

7.2 Maintenance and service work
7.2.1
Clean the appliance
Personnel:
n
Operator
n
T
rained personnel
Protective equipment:
n
Protective eyewear
n
Chemical resistant protective gloves
1. Wipe down the unit using a damp cloth.
2. Check the unit for secure attachment and external damage.
3. If applicable, check the display for damage and pixel errors.
4. Check the connector lines and cables for damage, secure fit and correct routing.
7.2.2 Opening the front hatch
Personnel:
n
Operator
Protective equipment:
n
Protective eyewear
n
Chemical resistant protective gloves
1
2
Fig. 9: Open the front flap (e.g. SMARTPOWER
TM
Rinse
Dispenser)
1
Hinge pin
2
Front flap
1.
Pull the hinge pin
1
upwards out of the unit.
2.
Open the front hatch
2
.
Servicing and maintenance
38MAN054128 Ver. 01-06.2024