Ecolab SMARTPOWER - Inserting the Detergent Capsule

6.3 Inserting the detergent capsule
Once the detergent capsule is used up, the concentration of the cleaning solution
decreases and the pre-rinse or hand wash results deteriorate. In this case, use a new
detergent capsule.
Personnel:
n
Operator
Protective equipment:
n
Protective gloves
n
Safety shoes
n
Protective eyewear
Material:
n
SMAR
TPOWER
TM
detergent capsule
Make sure the labels on the product and the dispenser match.
The colour and shape of the detergent capsule correspond to the product
symbol
4
on the hinged cover
.
1
2
3
4
Fig. 8: Inserting the detergent capsule
1
Hinged cover
2
Product cylinder
3
Detergent capsule
4
Product symbol
1.
Open the hinged cover
1
.
2.
Check the product cylinder
2
for foreign bodies and dirt and clean if necessary.
3.
Remove the detergent capsule
3
from the cellophane packaging.
4. Insert the detergent capsule into the product cylinder
.
5. Close the hinged lid.
Commissioning / operation
35 MAN054128 Ver. 01-06.2024