Chapter 51
| Multicast Routing Commands
PIM Multicast Routing
– 1204 –
Example
This example clears the RP map.
Console#clear ip pim bsr rp-set
Console#show ip pim rp mapping
PIM Group-to-RP Mappings
Console#
show ip pim bsr-router This command displays information about the bootstrap router (BSR).
Command Mode
Privileged Exec
Command Usage
This command displays information about the elected BSR.
Example
This example displays information about the BSR.
Console#show ip pim bsr-router
PIMv2 Bootstrap information
BSR Address : 192.168.0.2/32
Uptime : 01:01:23
BSR Priority : 200
Hash Mask Length : 20
Expire : 00:00:42
Role : Candidate BSR
State : Elected BSR
Console#
Table 38: show ip pim bsr-router - display description
Field Description
BSR Address
IP address of interface configured as the BSR.
Uptime
The time this BSR has been up and running.
BSR Priority
Priority assigned to this interface for use in the BSR election process.
Hash Mask Length
The number of significant bits used in the multicast group comparison
mask. This mask determines the multicast group for which this router
can be a BSR.
Expire
The time before this entry will be removed.
Role
Candidate BSR or Non-candidate BSR.
To Next Page
Loading...
Need help?
General