Chapter 4
| System Management Commands
System Status
– 136 –
ECS4620-28T_V1.2.1.6.bix OpCode Y 2013-07-02 08:18:42 17601308
Factory_Default_Config.cfg Config N 2000-12-31 00:00:32 455
startup1.cfg Config Y 2000-01-01 02:31:23 2924
----------------------------------------------------------------------------
Free space for compressed user config files: 65220608
show apr:
ARP Cache Timeout: 1200 (seconds)
IP Address MAC Address Type Interface
--------------- ----------------- --------- -----------
192.168.0.2 70-72-CF-83-34-66 other VLAN1
192.168.0.99 00-60-6E-00-5F-A1 dynamic VLAN1
Total entry : 2
show interfaces brief:
Interface Name Status PVID Pri Speed/Duplex Type Trunk
--------- ---------------- -------- ---- --- ------------- ------------ ---
Eth 1/ 1 Up 1 0 Auto-100full 1000BASE-T None
Eth 1/ 2 Down 1 0 Auto 1000BASE-T None
Eth 1/ 3 Down 1 0 Auto 1000BASE-T None
Eth 1/ 4 Down 1 0 Auto 1000BASE-T None
Eth 1/ 5 Down 1 0 Auto 1000BASE-T None
.
.
.
show users Shows all active console, Telnet, SSH and Web connections, including user name,
idle time and IP address.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
◆ The session used to execute this command is indicated by a “*” symbol next to
the Line (i.e., session) index number.
◆ A total of 8 SSH/Telnet connections and up to 20 Web connections are allowed.
Example
Console#show users
User Name Accounts:
User Name Privilege Public-Key
-------------------------------- --------- ----------
admin 15 None
guest 0 None
steve 15 None
Online Users:
Line User Name Idle time (h:m:s) Remote IP addr
------- -------------------------------- ----------------- ---------------
*console admin 0:00:00
VTY 0 admin 0:00:10 192.168.0.99
SSH 1 steve 0:00:06 192.168.1.19
To Next Page
Loading...
Need help?
General