Chapter 13
| Power over Ethernet Commands
– 471 –
show power
mainpower
Use this command to display the current power status for the switch.
Command Mode
Privileged Exec
Example
This example shows the maximum available PoE power and maximum allocated
PoE power for the ECS4620-52P.
Console#show power mainpower
Unit 1 Main Power Status
PoE Maximum Available Power : 780.0 Watts (using main power)
PoE Maximum Allocation Power : 780.0 Watts
System Operation Status : On
PoE Power Consumption : 0 Watts
Software Version : Version 0148 (Hex), Build 66 (Hex)
Console#
Table 83: show power mainpower - display description
Field Description
PoE Maximum
Available Power
The available power budget for the switch
PoE Maximum
Allocation Power
The power budget for the switch. If devices connected to the switch require
more power than the switch budget, the port power priority settings are used
to control the supplied power.
System Operation
Status
The current operating power status (displays on or off)
PoE Power
Consumption
The current power consumption on the switch in watts
Software Version The version of software running on the PoE controller subsystem in the switch.
To Next Page
Loading...
Need help?
General