Chapter 24
| Multicast Filtering Commands
MVR for IPv6
– 766 –
show mvr6 statistics This command shows MVR protocol-related statistics for the specified interface.
Syntax
show mvr6 statistics {input | output} [interface interface]
show mvr6 domain domain-id statistics
{input [interface interface] | output [interface interface] | query}
domain-id - An independent multicast domain. (Range: 1-5)
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN ID (Range: 1-4094)
query - Displays MVR query-related statistics.
Default Setting
Displays statistics for all domains.
Command Mode
Privileged Exec
Example
The following shows MVR6 protocol-related statistics received:
Console#show mvr6 domain 1 statistics input
MVR6 Domain 1, MVR6 VLAN 2:
Input Statistics:
Interface Report Leave G Query G(-S)-S Query Drop Join Succ Group
--------- -------- -------- -------- ------------- -------- --------- ------
Eth 1/ 1 23 11 4 10 5 20 9
Eth 1/ 2 12 15 8 3 5 19 4
DVLAN 1 2 0 0 2 2 20 9
MVLAN 2 2 0 0 2 2 20 9
Console#
Table 149: show mvr6 statistics input - display description
Field Description
Interface Shows interfaces attached to the MVR.
Report The number of IGMP membership reports received on this interface.
Leave The number of leave messages received on this interface.
G Query The number of general query messages received on this interface.
G(-S)-S Query The number of group specific or group-and-source specific query messages
received on this interface.
To Next Page
Loading...
Need help?
General