Edge-Core ECS4620-28P - Page 308

Chapter 8 | Authentication Commands
PPPoE Intermediate Agent
– 308 –
Command Mode
Privileged Exec
Example
Console#clear pppoe intermediate-agent statistics
Console#
show pppoe
intermediate-agent
info
This command displays configuration settings for the PPPoE Intermediate Agent.
Syntax
show pppoe intermediate-agent info [interface [interface]]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
Command Mode
Privileged Exec
Example
Console#show pppoe intermediate-agent info
PPPoE Intermediate Agent Global Status : Enabled
PPPoE Intermediate Agent Admin Access Node Identifier : 192.168.0.2
PPPoE Intermediate Agent Oper Access Node Identifier : 192.168.0.2
PPPoE Intermediate Agent Admin Generic Error Message :
PPPoE Intermediate Agent Oper Generic Error Message :
PPPoE Discover packet too large to process. Try reducing the number of tags
added.
Console#show pppoe intermediate-agent info interface ethernet 1/1
Interface PPPoE IA Trusted Vendor-Tag Strip Admin Circuit-ID Admin Remote-ID
--------- -------- ------- ---------------- ------------ ----------------
Eth 1/2 Yes Yes Yes 1/2:vid 00-00-E8-94-40-02
R-ID Delimiter Delimiter ASCII Oper Circuit-ID Oper Remote-ID
---------------- ---------------- ---------------- -----------------
Yes 3 1/2:vid 00-00-E8-94-40-02
Console#