Chapter 9
| General Security Measures
Network Access (MAC Address Authentication)
– 320 –
mac-authentication
reauth-time
Use this command to set the time period after which a connected MAC address
must be re-authenticated. Use the no form of this command to restore the default
value.
Syntax
mac-authentication reauth-time seconds
no mac-authentication reauth-time
seconds - The reauthentication time period. (Range: 120-1000000 seconds)
Default Setting
1800
Command Mode
Global Configuration
Command Usage
◆ The reauthentication time is a global setting and applies to all ports.
◆ When the reauthentication time expires for a secure MAC address it is
reauthenticated with the RADIUS server. During the reauthentication process
traffic through the port remains unaffected.
Example
Console(config)#mac-authentication reauth-time 300
Console(config)#
network-access
dynamic-qos
Use this command to enable the dynamic QoS feature for an authenticated port.
Use the no form to restore the default.
Syntax
[no] network-access dynamic-qos
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
◆ The RADIUS server may optionally return dynamic QoS assignments to be
applied to a switch port for an authenticated user. The “Filter-ID” attribute
To Next Page
Loading...
