To Next Page

To Previous Page

Chapter 9

| General Security Measures

Network Access (MAC Address Authentication)

– 329 –

clear network-access Use this command to clear entries from the secure MAC addresses table.

Syntax

clear network-access mac-address-table [static | dynamic]

[address mac-address] [interface interface]

static - Specifies static address entries.

dynamic - Specifies dynamic address entries.

mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-xx-xx-xx)

interface - Specifies a port interface.

ethernet unit/port

unit - Unit identifier. (Range: 1-8)

port - Port number. (Range: 1-28/52)

Default Setting

None

Command Mode

Privileged Exec

Example

Console#clear network-access mac-address-table interface ethernet 1/1

Console#

show network-access Use this command to display the MAC authentication settings for port interfaces.

Syntax

show network-access [interface interface]