Chapter 10
| Access Control Lists
ARP ACLs
– 419 –
log - Logs a packet when it matches the access control entry.
Default Setting
None
Command Mode
ARP ACL
Command Usage
New rules are added to the end of the list.
Example
This rule permits packets from any source IP and MAC address to the destination
subnet address 192.168.0.0.
Console(config-arp-acl)#$permit response ip any 192.168.0.0 255.255.0.0 mac
any any
Console(config-mac-acl)#
Related Commands
access-list arp (417)
show access-list arp This command displays the rules for configured ARP ACLs.
Syntax
show access-list arp [acl-name]
acl-name – Name of the ACL. (Maximum length: 32 characters)
Command Mode
Privileged Exec
Example
Console#show access-list arp
ARP access-list factory:
permit response ip any 192.168.0.0 255.255.0.0 mac any any
Console#
Related Commands
permit, deny (418)
To Next Page
Loading...
Need help?
General