Chapter 18
| Address Table Commands
– 520 –
Eth 1/ 1 00-E0-29-94-34-64 1 Learn Delete on Timeout
Console#
show mac-address-
table aging-time
This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table aging-time
Aging Status : Enabled
Aging Time: 300 sec.
Console#
show mac-address-
table count
This command shows the number of MAC addresses used and the number of
available MAC addresses for the overall system or for an interface.
Syntax
show mac-address-table count [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table count interface ethernet 1/1
MAC Entries for Eth 1/1
Total Address Count :0
Static Address Count :0
Dynamic Address Count :0
Console#show mac-address-table count
Compute the number of MAC Address...
To Next Page
Loading...
Need help?
General