Chapter 23
| Quality of Service Commands
– 663 –
show policy-map
interface
This command displays the service policy assigned to the specified interface.
Syntax
show policy-map interface interface {input | output}
interface
unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
Command Mode
Privileged Exec
Example
Console#show policy-map interface 1/5 input
Service-policy rd-policy
Console#
To Next Page
Loading...
Need help?
General