Edimax Print Server - Page 67

15. Press Insert and add your newly created print
queue to the list of queues serviced by the printer. Enter a
priority number for the queue service, or press
Enter to
accept the default.
16. Repeatedly press
Escape to exit the PCONSOLE
program.
17. You must load NetWare print server on the
NetWare file server so that the print server configured as a
remote printer can connect to that print server and service the
print jobs. To load the NetWare print server, type “LOAD
PSERVER.NLM PrintServer” command at the system console
of the NetWare file server, where PrintServer is the print
server name newly created by the PCONSOLE program.
To configure the print server as a NetWare remote
printer, perform the following steps:
1. From a workstation, log in to your NetWare server as
SUPERVISOR.
2. Run the PSETUP program included on the CD-ROM.
(ex. e:\dosutil\psetup.exe)