Declaration of Conformity
We,
Manufacture: Edwards Japan Limited
1078-1, Yoshihashi, Yachiyo-shi, Chiba, 276-8523, Japan
EU Representative: Edwards Limited
Manor Royal, Crawley, West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised
to assemble the technical file, that the product(s)
Product Name: Control unit for turbomolecular pump
Model Number: SCU-1600
Accessories Covered: TMS Unit, Lon Communication Unit
to which this declaration relates is in conformity with the following standard(s) or other
normative document(s)
EN61010-1:2001 Safety requirements for electrical equipment for measurement,
control and laboratory Use. General requirements
EN61326-1:2006 Electrical equipment for measurement, control & laboratory Use.
EMC requirements. General requirements
(Immunity: Industrial locations, Emission: Class A)
EN61000-6-2:2005 Electromagnetic compatibility (EMC). Generic standards.
Immunity for industrial environments
EN55011:2007, A2:2007 Industrial, scientific and medical (ISM) radio-frequency equipment.
Electromagnetic disturbance characteristics (Group1, Class A)
and fulfils all the relevant provisions of
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility (EMC) Directive
2002/95/EC* Restriction of Certain Hazardous Substances (RoHS) Directive
* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for
cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). This information relates
only to products sold on or after the date of this certificate. Edwards has taken all reasonable steps to confirm this
statement, which is based mainly on information from our suppliers. Whilst the RoHS Directive does not legally apply
to this vacuum equipment, we recognize that component compliance is relevant to many of our customers.
VI-DOC-76-001
EU representative:
Barrie D Brewster, Technical Manager, Edwards Limited
This product has been manufactured under a quality system registered
to ISO9001
Manufacture:
Yuji Kato, TMP Technical Senior Manager, Edwards Japan Limited
1
st
Mar. 2010, Yachiyo
Date and Place
5
t
Mar. 2010,
Burgess Hill
Date and Place
To Next Page
Loading...
