Parameterisation
MSM-USM2G-BA-UK-001 Page 35 of 45
For device and channel designation, all characters from A…Z and 0…9 are allowed.
The special characters „ { } | $ & # ; “ are not allowed. For channel designations, „\“
(backslash) is used as separation mark to start a new line.
To use the settings in one line for one or all other lines, line contents can be copied
to the desired line(s). By right-click on the marked line a context menu with the
following options opens:
Copy
Paste
Paste to all
The latter option fills all lines with the respective contents.
To adopt the value from the first line for a complete column, left-click on the column
header and then click on „OK“.
To Next Page
Loading...