100 Installation and Service Guide
Installing System Software
5 Start the E-35A (see page 42).
6 Follow the on-screen instructions on the Fiery QuickTouch or monitor.
Prepare the SATA HDD for replacement
Using Fiery Installer Builder you can prepare a SATA HDD as a bootable device and then load the system software files
on to the SATA HDD. The approximate time required to prepare the SATA HDD is 3 to 5 minutes. You can use the
prepared SATA HDD as an replacement for the SATA HDD on the E-35A.
If you are installing the system software on to the SATA HDD for replacement, you need a SATA to USB adapter to
connect the SATA HDD to the E-35A.
To prepare the SATA HDD
1 Attach the SATA to USB adapter, to an USB 3.0 port on your computer.
2 Connect the replacement SATA HDD to the other end of the SATA to USB adapter.
3 Double-click the Fiery Installer Builder icon on the desktop. You can also click Start > EFI > Fiery Installer Builder.
4 At the Downloaded window, select Color Controller E-35A 1.0.
5 From the Prepare action pull-down menu, select Prepare SATA HDD.
6 Click Next.
7 At the Select a SATA HDD window, click the replacement SATA HDD that you connected, and click Next.
A warning message “This HDD will be formatted and all the data in this HDD will be lost.” appears. Click Next to
format the HDD and proceed.
The SATA HDD will be formatted and the E-35A system software will be loaded on to the SATA HDD.
8 Once the SATA HDD is prepared, remove the SATA HDD from the SATA to USB adapter.
You can use this SATA HDD as an replacement for the SATA HDD on the E-35A.
Install the system software using the prepared replacement SATA HDD
You can install the system software using the prepared replacement SATA HDD.
To install the system software
1 Remove all the USB devices that are attached to the E-35A.
2 Shut down the E-35A (see page 42).
Important: Improper handling can damage the HDD. Handle the HDD with extreme care. See “Handling the
hard disk drive” on page 11.
Important: All the data on the HDD will be lost when you format the HDD. Make sure that no valuable data is
stored on the device.
To Next Page
Loading...
Need help?
General
