EFI E-35A - E-35 A Specifications and Compliance; Hardware Features; Physical Specifications; Networking and Connectivity Features

116 Installation and Service Guide
Specifications
Specifications
This section provides an overview of E-35A features, specifications, and safety certifications.
Note: Replacement parts and specifications are subject to change. When ordering replacement parts, refer to the
current parts list maintained by your authorized service/support center. Install the correct parts as directed by your
service/support center.
Hardware features
• Intel Pentium G4400 3.3GHz Dual Core CPU
• Memory: 8GB (2x 4GB)
• An RJ-45 connector for 10BaseT/100BaseTX/1000BaseT Mbs connectivity over twisted pair cable (upper port)
• 500GB hard disk drive standard
Physical specifications
• Operating environment:
• Temperature: +10°C to +40°C
• Relative Humidity: 10%-85% (non-condensing)
• Power supply voltage input: 100-240V @ 50-60Hz
• Rated Power Consumption: 150W
• Dimensions (height x depth x width): 38.3 cm (15.10 in.) x 20.3 cm (8 in.)x 24.7 cm (9.75 in.)
• Weight: 5.9kg (13.0 lbs.)
Networking and connectivity
• Supports AppleTalk and TCP/IP protocols simultaneously (for font download only).
• Ethernet connector (upper port) that supports 10BaseT/100BaseTX/1000BaseT twisted pair network connectivity.
User software
For optimal performance, maintain current versions of the user software on every network computer used to print to
the E-35A. User software is installed over a network via WebTools.
Safety and emissions compliance
The E-35A has been certified to meet or surpass the following standards: