Need help?Do you have a question about the ELAU PMC-2 and is the answer not in the manual?
General| Type | Motion Controller |
|---|---|
| Series | PMC-2 |
| PLC functionality | Yes |
| Power Supply | 24 VDC |
| Programming language | IEC 61131-3 |
| Communication interfaces | Ethernet, Serial |
| Ethernet | 10/100 Mbps |
| USB Ports | USB 2.0 |
| Operating Temperature | 0°C to 55°C |
Explains the ECL-ELAU Control Language and EPAS-3 for PMC-2 programming.
Provides essential safety guidelines for handling and operating the PMC-2.
Details safety measures for extra-low voltages and protection against electrical parts.
Addresses risks and precautions related to hazardous movements of the drive.
Covers general wiring, cable cross-sections, and EM tolerance.
Explains the DC-circuit, stress limits, short circuit protection, and bleeders.
Diagram and instructions for connecting mains power and motor to the PMC-2.
Step-by-step guide for initial setup, checks, and parameter configuration.
Detailed list of PMC-2 parameters, grouped by function (General, Positioning, Speed, Encoder, Motor, Setup, Comm).
Lists all errors by class and provides a chart of error reaction behaviors.
Defines variable types, access levels, system variables, and their grouping.
To Next Page